Home Page The Club Computers News Links Glossary EYAWTK

Everything You Always Wanted To Know
But Were Too Polite To Ask

Amiga Technical References

SCSI Reselect Problems

System reports "SCSI Bus Phase Error" or copying from one SCSI device to another doesn't seem to work, but copying from the same device to a floppy does work. Check that all SCSI devices support Reselect; if not, disable Reselect mode in the drive's RDB. Some SCSI controllers, notably GVP, let you disable Reselect mode on a per-address basis. 

Copyright 2000 Amiga Auckland Inc. All rights reserved.
Revised: June 17, 2005.