Home Page The Club Computers News Links Glossary EYAWTK
Before Amiga Background ICS OCS ECS AGA ??? AmigaOne
U-Boot SLB Linux Amiga OS Dual Boot Motherboards Peripherals Other
Initialisation Installation OS4 Updates About OS4 File Systems Networking Printing Other
Introduction File System Workbench Preferences Commands Error Msgs Miscellaneous

AmigaOS 4.0 - About OS4 - Commands

USBINSPECTOR Tool
Purpose: To display currently active USB devices.
Format: USBINSPECTOR
Template: (none)
Path: SYS:Tools/USBInspector
USBINSPECTOR is used to display all active USB devices and show the ports where they are connected, as well as the USB topology. When started the following screen is displayed:

Click on the corresponding entries in the left-hand window to display the details in the right-hand window.

If you click on the Topology tab, the following screen is displayed:

This screen shows which devices are connected to which hubs etc. Click on the corresponding entries in the left-hand window to display the details in the right-hand window as previously.

See also: USBCTRL, USBSTART, USBSTOP


Return to Commands Selection

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.


Copyright 2006 Amiga Auckland Inc. All rights reserved.
Revised: February 9, 2006.