Home Page The Club Computers News Links Glossary EYAWTK
Before Amiga Background ICS OCS ECS AGA ??? PPC
U-Boot SLB Linux Amiga OS Dual Boot Motherboards Peripherals Other
Initialisation Installation OS4 Updates About OS4 File Systems Networking Printing Other
Introduction File System Workbench Preferences Commands Error Msgs Miscellaneous

AmigaOS 4.0 - About OS4 - Commands

UBOOT Preferences Editor
Purpose: To reconfigure the UBoot settings.
Format: UBOOT
Template: (none)
Path: SYS:Prefs/UBoot
UBOOT enables the U-Boot Preferences stored in Non-Volatile RAM to be configured from AmigaDOS, although some of the parameters cannot take effect until the system is cold-booted.

This facility is an alternative to interrupting the hardware boot sequence and making configuration changes using the U-Boot Preferences menus.

Instructions for using the UBoot Preferences editor can be found here.

Example:

3.OS4:> UBOOT will open the UBoot Preferences window.


Return to Commands Selection

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.


Copyright 2006 Amiga Auckland Inc. All rights reserved.
Revised: February 9, 2006.