AmigaOS 4.0 - About OS4 - Commands
||Sets or reads the battery backed-up hardware clock.
[LOAD | SAVE | RESET]
SETCLOCK sets or reads the battery backed-up hardware clock.
SETCLOCK SAVE sets the date and time of the battery backed-up hardware clock
from the current system time, which is set with the TIME Preferences Editor or the
DATE command. SETCLOCK SAVE is typically used
after a DATE command.
SETCLOCK LOAD sets the current system time from the battery backed-up hardware clock.
This is done automatically during the boot process.
SETCLOCK RESET resets the battery backed-up hardware clock completely. Use this option if the clock is
accidentally turned off, or LOAD and SAVE do not appear to work correctly.
3.OS4:> DATE 1-JAN-05 22:30:00
3.OS4:> SETCLOCK SAVE
save the date, January 1, 2005, and the time 11:30 p.m., to the battery backed-up hardware clock. When the system is booted,
the system clock is set with the time saved in the hardware clock.
See Also: DATE
Return to Commands Selection
Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences
and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held
accountable for any issues that may result from using it.
Copyright © 2006 Amiga Auckland Inc. All rights reserved.
Revised: February 9, 2006.