Home Page The Club Computers News Links Glossary EYAWTK
Before Amiga Background ICS OCS ECS AGA ??? PPC
U-Boot SLB Linux Amiga OS Dual Boot Motherboards Peripherals Other
Initialisation Installation OS4 Updates About OS4 File Systems Networking Printing Other
Introduction File System Workbench Preferences Commands Error Msgs Miscellaneous

AmigaOS 4.0 - About OS4 - Commands

NETSHUTDOWN Networking
Purpose: To shutdown the network.
Format: NETSHUTDOWN [TIMEOUT <time>] [QUIET]
Template: TIMEOUT/N, QUIET/S
Path: C:netshutdown
You can stop the network with the NetShutdown program. It will attempt to perform an immediate shutdown and wait for this process to finish. However, if client software still has other important work to do, it may take longer for the network activity to cease. In that case the network may shut down later on its own accord.

The NetShutdown program needs to be started from shell. It will print a message like this if it succeeds:

Waiting for network to shut down... shutdown finished. By this time the shutdown should be complete, device drivers currently in use will have been closed, etc. Note that all interface configurations and routes you may have added will have been dropped, too.

Example:

3.OS4:> NETSHUTDOWN
This may take a minute or two to complete while it tries to shut down the network.


Return to Commands Selection

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.


Copyright 2006 Amiga Auckland Inc. All rights reserved.
Revised: February 9, 2006.