Home Page The Club Computers News Links Glossary EYAWTK
Before Amiga Background ICS OCS ECS AGA ??? PPC
U-Boot SLB Linux Amiga OS Dual Boot Motherboards Peripherals Other
Initialisation Installation OS4 Updates About OS4 File Systems Networking Printing Other
Introduction File System Workbench Preferences Commands Error Msgs Miscellaneous

AmigaOS 4.0 - About OS4 - Commands

INITPRINTER Tool
Purpose: To initialize your printer with the Preferences specifications.
Format: INITPRINTER
Template: (none)
Path: SYS:Tools/InitPrinter
INITPRINTER sends the printer options specified by the Printer and PrinterGfx Preferences editors to the printer. It initializes your printer and loads it with the new or changed specifications when you turn on the printer and double-click on the InitPrinter icon.

Your printer resets automatically when it receives and processes initialization information on first access during a session. If you turn the printer off, you might need to use INITPRINTER to reinitialize it.

Example:

3.OS4:> INITPRINTER as long as your printer is turned on, InitPrinter initializes and loads it with the new or changed specifications.


Return to Commands Selection

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.


Copyright 2006 Amiga Auckland Inc. All rights reserved.
Revised: February 9, 2006.