Home Page The Club Computers News Links Glossary EYAWTK
Before Amiga Background ICS OCS ECS AGA ??? PPC
U-Boot SLB Linux Amiga OS Dual Boot Motherboards Peripherals Other
Initialisation Installation OS4 Updates About OS4 File Systems Networking Printing Other
Introduction File System Workbench Preferences Commands Error Msgs Miscellaneous

AmigaOS 4.0 - About OS4 - Commands

FAULT Internal
Purpose: To print the message(s) for the specified error code(s).
Format: FAULT {error number}
Template: /N/M
Path: Internal
FAULT prints the messages corresponding to the error numbers supplied. Any number of error numbers can be specified at once. If several error numbers are given with FAULT, they must be separated by spaces.

Example:

If you received the error message:

Error when opening DF0:TestFile 205 and needed more information, you would enter: 3.OS4:> FAULT 205 FAULT 205: object not found This tells you that the error occurred because TestFile could not be found on DF0:.

A complete list of error messages can be found here.


Return to Commands Selection

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.


Copyright 2006 Amiga Auckland Inc. All rights reserved.
Revised: February 9, 2006.