Home Page The Club Computers News Links Glossary EYAWTK
Before Amiga Background ICS OCS ECS AGA ??? PPC
U-Boot SLB Linux Amiga OS Dual Boot Motherboards Peripherals Other
Initialisation Installation OS4 Updates About OS4 File Systems Networking Printing Other
Introduction File System Workbench Preferences Commands Error Msgs Miscellaneous

AmigaOS 4.0 - About OS4 - Commands

AUTOPOINT Commodity
Purpose: To automatically select any window the pointer is over.
Format: AUTOPOINT [CX_PRIORITY <priority>] [SUPPORTNOTITLE]
Template: CX_PRIORITY/N/K, SUPPORTNOTITLE/S
Path: SYS:Tools/Commodities/Autopoint
When AUTOPOINT is run, any window that the pointer is over is automatically selected. You do not need to click the selection button to activate it.

The CX_PRIORITY <priority> argument sets the priority of AUTOPOINT in relation to all other Commodity Exchange programs. (This is the same as entering a CX_PRIORITY=<priority> Tool Type in the icon's Information window.) All the Commodity Exchange programs are set to a default priority of 0. If you specify a <priority> value higher than 0, AUTOPOINT will take priority over any other Commodity Exchange program.

To exit AUTOPOINT when it has been started from a Shell, press Ctrl+C or use the BREAK command.

Example:

3.OS4:> AUTOPOINT
starts the AutoPoint program.


Return to Commands Selection

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.


Copyright 2006 Amiga Auckland Inc. All rights reserved.
Revised: December 24, 2006.