Home Page The Club Computers News Links Glossary EYAWTK
Before Amiga Background ICS OCS ECS AGA ??? PPC
U-Boot SLB Linux Amiga OS Dual Boot Motherboards Peripherals Other
Initialisation Installation OS4 Updates About OS4 File Systems Networking Printing Other
Introduction File System Workbench Preferences Commands Error Msgs Miscellaneous

AmigaOS 4.0 - About OS4 - Preferences

UBOOT - IDE Ports SIL Serial ATA (3112/3512) Preferences Editor

The U-Boot Prefs "IDE Ports Menu" is accessed from the third tab and gives access to all of the IDE related parameters. Other parameters can be accessed by clicking on the other tabs at the top of the display, namely Boot, Hardware, or OS4 Specific.

The IDE Ports has another set of tabs partway down the display for the various IDE controllers. The third tab gives access to all of the SIL Serial ATA (3112/3512) related parameters. Parameters for the other controllers can be accessed by clicking on the other tabs, namely Onboard VIA686, SIL Parallel ATA (680), and SIL 4-ports Serial ATA (3114).

AmigaOS U-Boot Preferences Menu

Global IDE Preferences
Options available are:
  • ATAPI command timeout - equivalent to ide_cd_timeout in UBoot Environment Variables and specifies the timeout period in seconds for ATAPI commands. Does not appear to working at this time.
  • Reset timeout - equivalent to ? in UBoot Environment Variables and specifies the reset timeout period in seconds for ATAPI commands. Does not appear to working at this time.
  • Reset unit when rescanning - equivalent to ide_doreset in UBoot Environment Variables and specifies that the IDE devices should be reset to check for media changes when rescanning. Does not appear to working at this time.
  • Swap primary and secondary bus - equivalent to ide_swap in UBoot Environment Variables and specifies that the Primary and Secondary bus should be swapped. Does not appear to working at this time.
SIL Serial ATA (3112) Options available are:
  • Active bus when scanning - equivalent to sii3112ide_maxbus in UBoot Environment Variables and specifies buses are active. Options are Disabled, Primary and Both. If the SiL3112 card was being used it would normally be Primary or Both, otherwise it would be Disabled.
  • Scan timeout - equivalent to sii3112ide_timeout in UBoot Environment Variables and specifies the scan timeout period in seconds for the SIL3112 devices.
  Primary bus/unit 0
  • Unit type - equivalent to the first character of sii3112ide_conf in UBoot Environment Variables and specifies the type of device connected as unit 0. Options are Disabled, Harddisk, DVD/CD, and Automatic. Default is Automatic.
  • Transfer Mode - equivalent to the first character of sii3112ide_xfer in UBoot Environment Variables and specifies the transfer mode to be used for the device connected as unit 0. Options are Automatic, UDMA 0, UDMA 1, UDMA 2, UDMA 3, UDMA 4, UDMA 5, UDMA 6 or Best PIO. Default is Best PIO.
  • Use IRQ - equivalent to the first character of sii3112ide_irq in UBoot Environment Variables and specifies whether the device connected as unit 0 should use IRQ's. Normally ticked.
Secondary bus/unit 1
  • Unit type - equivalent to the second character of sii3112ide_conf in UBoot Environment Variables and specifies the type of device connected as unit 1. Options are Disabled, Harddisk, DVD/CD, and Automatic. Default is Automatic.
  • Transfer Mode - equivalent to the second character of sii3112ide_xfer in UBoot Environment Variables and specifies the transfer mode to be used for the device connected as unit 1. Options are Automatic, UDMA 0, UDMA 1, UDMA 2, UDMA 3, UDMA 4, UDMA 5, UDMA 6 or Best PIO. Default is Best PIO.
  • Use IRQ - equivalent to the second character of sii3112ide_irq in UBoot Environment Variables and specifies whether the device connected as unit 1 should use IRQ's. Normally ticked.
SIL Serial ATA (3512) Options available are:
  • Active bus when scanning - equivalent to sii3512ide_maxbus in UBoot Environment Variables and specifies buses are active. Options are Disabled, Primary and Both. If the SiL3512 card was being used it would normally be Primary or Both, otherwise it would be Disabled.
  • Scan timeout - equivalent to sii3512ide_timeout in UBoot Environment Variables and specifies the scan timeout period in seconds for the SIL3512 devices.
  Primary bus/unit 0
  • Unit type - equivalent to the first character of sii3512ide_conf in UBoot Environment Variables and specifies the type of device connected as unit 0. Options are Disabled, Harddisk, DVD/CD, and Automatic. Default is Automatic.
  • Transfer Mode - equivalent to the first character of sii3512ide_xfer in UBoot Environment Variables and specifies the transfer mode to be used for the device connected as unit 0. Options are Automatic, UDMA 0, UDMA 1, UDMA 2, UDMA 3, UDMA 4, UDMA 5, UDMA 6 or Best PIO. Default is Best PIO.
  • Use IRQ - equivalent to the first character of sii3512ide_irq in UBoot Environment Variables and specifies whether the device connected as unit 0 should use IRQ's. Normally ticked.
Secondary bus/unit 1
  • Unit type - equivalent to the second character of sii3512ide_conf in UBoot Environment Variables and specifies the type of device connected as unit 1. Options are Disabled, Harddisk, DVD/CD, and Automatic. Default is Automatic.
  • Transfer Mode - equivalent to the second character of sii3512ide_xfer in UBoot Environment Variables and specifies the transfer mode to be used for the device connected as unit 1. Options are Automatic, UDMA 0, UDMA 1, UDMA 2, UDMA 3, UDMA 4, UDMA 5, UDMA 6 or Best PIO. Default is Best PIO.
  • Use IRQ - equivalent to the second character of sii3512ide_irq in UBoot Environment Variables and specifies whether the device connected as unit 1 should use IRQ's. Normally ticked.
Action Buttons
When you make changes you can choose to 'Save' them permanently, 'Revert' to the previously saved values, or you can 'Cancel' and lose all changes. (The Revert option does not appear to be working properly at this time.)

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.


Copyright 2006 Amiga Auckland Inc. All rights reserved.
Revised: February 9, 2006.