Home Page The Club Computers News Links Glossary EYAWTK
Before Amiga Background ICS OCS ECS AGA ??? PPC
U-Boot SLB Linux Amiga OS Dual Boot Motherboards Peripherals Other
Initialisation Installation Upgd Kernel About Linux Networking Printing MOL UAE
Stand-alone using VIA686B Dual-boot using VIA686B 2.4.26 Kernel using VIA686B Stand-alone using SiL0680 Dual-boot using SiL0680 2.4.26 Kernel using SiL0680 2.6.9 Kernel using SiL0680

AmigaOne - Linux - Initialisation Displays

Linux Stand-Alone using the onboard VIA686B IDE controller with DMA turned off

On a Linux only system using the VIA686B IDE controller with DMA turned off (using 'ide=nodma' on the bootargs parameter), the following initialisation processes occur before control is passed to the Linux Kernel:

Loading from IDE device 0, partition 1: Name: hda1
  Type: U-Boot
   Image Name:   Linux-2.4.26
   Created:      2004-12-21   5:24:48 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1310377 Bytes =  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
Automatic boot of image at addr 0x00500000 ...
## Booting image at 00500000 ...
   Image Name:   Linux-2.4.26
   Created:      2004-12-21   5:24:48 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1310377 Bytes =  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.


Copyright 2005 Amiga Auckland Inc. All rights reserved.
Revised: September 25, 2005.