Home Page The Club Computers News Links Glossary EYAWTK

Everything You Always Wanted To Know
But Were Too Polite To Ask

Amiga Technical References

GVP G-Force 030 25/40/50MHz Jumper Settings

Common To 25, 40 and 50MHz Cards

Jumper Open Closed Default
J2 GForce030 Disabled Enabled Closed
J3 MMU Enabled MMU Disabled Open
J7 Reserved Reserved Open
J8 OmniROM (AT/SCSI) SCSi ROM Open
J9 ROM Disabled ROM Enabled Closed
J10 Reserved Reserved Open
J11 Reserved Reserved Open
J13 Reserved Reserved Open
J14 SCSI Drive Connected SCSI Drive Disconnected Either
J15 Reserved Reserved Open

Common To 25, 40 and 50MHz Cards
Jumper Pins 1 & 2 Pins 2 & 3 Default
CN7 Reserved Reserved 1 & 2
CN14 Reserved Reserved 2 & 3
CN15 Reserved Reserved 1 & 2
CN16 Seperate 882 Clock 68882 Uses CPU Clock 2 & 3

25MHz G-Force Combo Board
Jumper Pins 1 & 2 Pins 2 & 3 Default
J4 Reserved Reserved Closed
J5 Reserved Reserved Open
J6 Reserved Reserved Closed
J12 All Banks as Extended Bank 1 or 2 as Auto-Config Closed
Jumper Pins 1 & 2 Pins 2 & 3 Default
CN8 Reserved Reserved 2 & 3

40MHz G-Force Combo Board
Jumper Pins 1 & 2 Pins 2 & 3 Default
J4 Reserved Reserved Closed
J5 Reserved Reserved Closed
J6 Reserved Reserved Open
J12 All Banks as Extended Bank 1 or 2 as Auto-Config Closed
Jumper Pins 1 & 2 Pins 2 & 3 Default
CN8 Reserved Reserved 2 & 3

50MHz G-Force Combo Board
Jumper Pins 1 & 2 Pins 2 & 3 Default
J4 Reserved Reserved Closed
J5 Reserved Reserved Closed
J6 Reserved Reserved Closed
J12 All Banks as Extended Banks 1 & 2 as Auto-Config Closed
Jumper Pins 1 & 2 Pins 2 & 3 Default
CN8 Reserved Reserved 1 & 2

4 PIN POWER CONNECTOR
25-pin External SCSI Connector
50-pin Internal SCSI Connector



Copyright 2000 Amiga Auckland Inc. All rights reserved.
Revised: June 16, 2005.